American West Analytical Laboratories

    Home Up Contact AWAL Contents Search

Soil Wet Chemistry
      

    NEWS  References  Capabilities  About AWAL

 
 

Solid / Soil Matrix2
Analyte Method Sample Quantity1,2 Container Type Preservation Hold Time
WetChemistry      
Chloride SW846 9251 or 9056 50 g plastic or glass none 28 days
Corrosivity (pH only) SW846 9045D 50 g plastic or glass none immediately
Cyanide-Amenable SW846 9013 20 g plastic or glass cool 4oC 14 days
Cyanide-Total SW846 9012B 20 g plastic or glass cool 4oC 14 days
Flash Point SW846 1010A 30 g plastic or glass cool 4oC NA
Fluoride SW846 9214 or 9056 20 g plastic or glass cool 4oC 28 days
Free Liquids SW846 9095B 200 g plastic or glass none NA
Grain Size (Sieve) ASTM 2488-84 500 g plastic or glass none NA
Ignitability SW846 1010A 30 g plastic or glass cool 4oC NA
Oil & Grease (Hexane) EPA 1664A Mod. 60 g plastic or glass cool 4oC 28 days
Oil & Grease (Hexane/SGT) (TRPH) EPA 1664A Mod. 60 g plastic or glass cool 4oC 28 days
pH SW846 9045D 50 g plastic or glass none immediately
Phenolics SW846 9066 30 g plastic or glass cool 4oC 28 days
Phosphate-Total EPA 365.1 Mod. 30 g plastic or glass cool 4oC 28 days
Reactive Cyanide SW846 Vol 1C Chap. 7, 8.3/7.3.3 30 g plastic or glass cool 4oC 7 days
Reactive Sulfide SW846 Vol 1C Chap. 7, 8.3/7.3.4 30 g plastic or glass cool 4oC 7 days
Solids-Fixed SM2540G 20 g plastic or glass cool 4oC 7 days
Solids-Total SM2540B&G 20 g plastic or glass cool 4oC 7 days
Solids-Volatile EPA 160.4 & SM2510G 20 g plastic or glass cool 4oC 7 days
Sulfate SW846 9038 or 9056 50 g plastic or glass cool 4oC 28 days
Total Organic Carbon (TOC) SW846 9060 (not performed at AWAL) 20 g plastic or glass cool 4oC 28 days
Total Organic Halides (TOX) SW846 9020B 20 g plastic or glass cool 4oC 28 days

Total Recoverable Petroleum Hydrocarbons

EPA 1664A Modified

 60 g plastic or glass cool 4oC 28 days
           
1 - This does not include the volume necessary to perform MS/MSD analyses. Include additional sample (normally 3 times the quoted volume or mass) for each sample requiring an MS/MSD. This extra sample volume should always be included for at least one sample in sample sets of 5 or greater. Contact the laboratory for more information.
2 - For reporting results in dry weight a total solid analysis must be included. Be sure to collect a sample for total solids.

 
Last modified: December 15, 2007